Hunter X Core Manual

The Hunter X-Core is a versatile and easy-to-use irrigation controller designed for residential and light commercial applications. Here are some basic instructions for setting up and using the X-Core:

  1. Mount the controller: Choose a location near a power source and the irrigation valves. Mount the controller on a wall using the provided screws and anchors.
  2. Connect the wires: Connect the common wire (usually white) to the C terminal, and the zone wires (usually colored) to the corresponding zone terminals. If you have a master valve or pump start relay, connect those wires to the MV/PUMP terminal.
  3. Set the date and time: Use the arrow buttons to navigate the menus and the plus/minus buttons to adjust the values. Press the enter button to save each setting.
  4. Set the watering schedule: Choose the days of the week and the start times for each zone. You can also set the watering duration and intervals.
  5. Program the seasonal adjustment: This feature allows you to adjust the watering schedule based on changes in weather or plant needs. You can increase or decrease the watering time for all zones at once.
  6. Test the system: Use the manual start feature to test each zone and make sure the sprinklers are working properly.
  7. Troubleshoot any issues: If you encounter any problems, consult the troubleshooting section of the manual or contact Hunter customer support for assistance.

Overall, the Hunter X-Core is a reliable and user-friendly irrigation controller that can help you maintain a healthy and beautiful lawn or garden.

Check The Hunter X core manual Here

Also Check Top Hunter Sprinklers on Amazon

Scroll to Top